Hot Specifications of Chain Link fence

• 200 m length barbed wire double twisted, wire gauge: 1.6 × 1.6 mm, barb spacing: 4".
• Aluminum or stainless chain link fencing, 12ft long by 3ft tall with a mesh size of 2".
• Barbed for your horticultural farm as specification of opening 60 mm height 1.2 m, wire diameter: 1.70/2.50 mm.
• 2000 square meters of aluminum diamond mesh fence. 1.8 m × 75 m × 2.5 m × 25 m.
• 11 gauge black vinyl coated chain link fence. The fence is 5 feet high & 70 feet long.
• 12 chain link panels 3' high and 10 to 12' long. Regular standard chain link fencing.
• Slats fence (green or brown) for 5 foot chain link fence. The area is approximately 140 feet long.
• Steel wire galvanized and green plastic coated. 36 m long 4 m high chain link fencing for replacement on one side of a tennis court.
• Vinyl coated wire mesh, diamond mesh (2 inches per side), 4 feet high and approx 8 feet long, green in color, twist type top.
• Chain link fence of 8ft high and 1000 ft long, mesh size 50 mm × 50 mm.
• 800 meters of 2.5 meter height fencing for a deer fence.
• 4 ft. × 50 ft. 9 gauge black chain link fabric.
• A 40" × 84" chain link door with panic bar and hardware.
• Building a chain link fence topped with bard wire. The fence would be 8 feet high with barbed wire topping the fence.
• Diamond chain link wire mesh with the mesh size of 75 × 75 mm. Bare wire diameter is 2.5 mm and PVC coating is 1.5 mm. Height of the mesh is 2.4 m and total requirement is 1000 m.
• SS chain link in either 201, 302 or 304SS 2 mm or 2.5 mm wire and with either 2.5" or 4" openings.
• Green chain wire fencing, for 6 batting cages that are 15'w × 70'l × 8'h.
• chain link fence, 2.55/3.55 mm PVC coated fence 50 × 50, 2.30 mtr high with corner post.
• Wide enough for pallet jack, portable chain link fence 20" deep × 12" wide × 8ft tall area with one entrance.
• Mesh grid non zinc coated chain link panels 50 × 50 (hole size) 1.8 mm (wire diameter) 2 mm (width) 10 ft (length).
• 10 meters × 1 meters of black galvanized wire mesh with 30 mm hole size for gates. panic bar kits for a 4' wide chain link gate.
• Two rolls of 45m by 1m black ticker gauge smaller holes chain link fence.
• Chain link fence 126 feet by 1m height including a gate with 2 feet.
• Chain link fence and posts 84 ft × 38 ft. 3 gates 36 inches.
• Chain link fence, gauge 10 galvanized wire conforming to 2.4 meters width and 181m length. It should be zinc coated.
• Fence a farm and chain link wire of 2.5 m width around 22 rolls of 18 m length each.
• 1320 lineal feet of 8' chain link fencing enough to enclose 2 areas.
• Roll galvanized chain link, height 60 inches, length 50 foot, gauge mesh size 9 × 2 inches.
• Tension Wire:
  • Wire steel inside 2.7 mm galvanized.
  • Wire after coating PVC 3.8 mm.
  • Rolls of 50 mtr - 100 mtr.
• Chain link fencing, diameter 3.55 mm, mesh 50 mm, 2 m × 12.5 m length.
• 50 mm × 50 mm, galvanized 6' by 10' fence panels. One with a gate that opens inward.
• Three rolls of your 3 mm, 2.5 m × 50 m stainless steel chain link fence.
• Temporary chain link fence panels 2 panels with a mesh of 60 mm and a 2.5 mm wire diameter.
• 8 gauge × 36 height by 50 length black bonded chain link fence.
• Black chain link fence with the knuckle top (not the twist top). 1.2 m (4ft) high and 50 m in total.
• 4' high vinyl coated chain link fence probably 9 gauge for a dog park and a detention area.